"instax SHARE" is FUJIFILM official application that can be used to print images from smartphones to instax SHARE smartphone printer.
[Select Your Best Shot!]
"instax SHARE" is an app to print images from your smartphone with the smartphone printer instax SHARE SP-1/SP-2/SP-3(FUJIFILM). You can enjoy beautiful instax print by simply selecting best shots in your smartphone or tablet within less than a minute.
[Supported Printer]
FUJIFILM instax SHARE Smartphone Printer SP-1/SP-2/SP-3
* Not support to old model printers.
[Supported Smartphones]
Android 4.0.3 or later
*With regard to customers who use Android ver. 6.0.x or later, there is a case that the connection between the smartphone and the printer does not work if GPS function is OFF. For the customer corresponding to this phenomenon, please turn on the GPS function when you use instax SHARE.
CAUTION: SETTINGS
If you are using Android 6.0 or later and cannot connect to the printer, check the following settings.
(1) GPS Settings
It is sometimes not possible to connect to the printer when the GPS function of your Android device is turned off.Follow the steps below to turn your GPS function on.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting".
(2) Tap "Location".
(3) If "Position Information" is off, turn it on.
(4) Try connecting to the printer.
(5) If communication is still not possible after performing steps (1) to (3), turn the position information setting in (3) off and back on again, then try connecting to the printer again.
(2) Authority settings in the "instax SHARE" app
Some or all of the functions of the "instax SHARE" app cannot be used unless the following authority settings are enabled for the app.
Please follow the steps below to enable these authority settings. We apologize for the inconvenience.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting"
(2) Tap "Apps"
(3) Tap "instax SHARE"
(4) Tap "Permission"
(5) Enable "Camera", "Storage" and "Location".
[How to print]
Print photos taken with smartphones.
1. Turn on the printer.
2. Launch the instax SHARE app.
3. Select image from Photos or SNS, or take photo with a smartphone camera.
4. Once image is selected, press Edit and edit the image (scaling, rotate, filter and template).
5. Post message on a template if template which accepts text is selected.
6. Press "Connect and print." when editting is completed.
7. When you print for the first time, will be asked password for the printer, please enter initial password that is wrote in User's Guide of the printer.
"SHARE INSTAX" هو طلب رسمي FUJIFILM التي يمكن استخدامها لطباعة الصور من الهواتف الذكية إلى INSTAX طابعة SHARE الهاتف الذكي.
[اختر أفضل لقطة الخاص بك!]
"SHARE INSTAX" هو التطبيق لطباعة الصور من الهاتف الذكي الخاص بك مع الهاتف الذكي INSTAX طابعة SHARE SP-1 / SP-2 / SP-3 (FUJIFILM). يمكنك التمتع جميلة الطباعة INSTAX ببساطة عن طريق اختيار أفضل اللقطات في الهاتف الذكي أو الكمبيوتر اللوحي في غضون اقل من دقيقة.
[طباعة المدعومة]
FUJIFILM INSTAX SHARE الهاتف الذكي الطابعة SP-1 / SP-2 / SP-3
* لا تدعم الطابعات النموذج القديم.
[دعم الهواتف الذكية]
الروبوت 4.0.3 أو في وقت لاحق
* وفيما يتعلق العملاء الذين يستخدمون النسخة الروبوت. 6.0.x أو في وقت لاحق، هناك حالة أن الاتصال بين الهاتف الذكي والطابعة لا تعمل إذا GPS وظيفة هي OFF. للعميل المقابلة لهذه الظاهرة، يرجى بدوره على وظيفة GPS عند استخدام INSTAX SHARE.
تنبيه: SETTINGS
إذا كنت تستخدم الروبوت 6.0 أو في وقت لاحق ولا يمكن الاتصال بالطابعة، والتحقق من الإعدادات التالية.
(1) GPS إعدادات
بل هو أحيانا لا يمكن الاتصال بالطابعة عند تشغيل وظيفة GPS لجهاز الروبوت الخاص بك off.Follow الخطوات التالية لتحويل وظيفة GPS الخاص بك على.
على سبيل المثال: حقيبة جهاز Nexus7 (الروبوت 6.0.1)
(1) انقر على "إعداد".
(2) اضغط على "الموقع".
(3) إذا كان "معلومات الموقع" هو خارج، تشغيله.
(4) حاول الاتصال إلى الطابعة.
(5) إذا كان البلاغ يزال من غير الممكن بعد تنفيذ الخطوات (1) الى (3)، وتحويل المعلومات موقف الإعداد في (3) الخروج والعودة مرة أخرى، ثم حاول الاتصال إلى الطابعة مرة أخرى.
(2) إعدادات السلطة في "SHARE INSTAX" التطبيق
بعض وظائف التطبيق "INSTAX SHARE" أو عن لا يمكن استخدامها إلا إذا تم تمكين الإعدادات السلطة التالية للحصول على التطبيق.
يرجى اتباع الخطوات التالية لتمكين هذه الإعدادات السلطة. نعتذر عن الإزعاج.
على سبيل المثال: حقيبة جهاز Nexus7 (الروبوت 6.0.1)
(1) انقر على "إعداد"
(2) اضغط على "تطبيقات"
(3) اضغط على "SHARE INSTAX"
(4) اضغط على "إذن"
(5) تمكين "الكاميرا"، "التخزين" و "الموقع".
[كيفية طباعة]
طباعة الصور التي اتخذت مع الهواتف الذكية.
1. قم بتشغيل الطابعة.
2. إطلاق التطبيق INSTAX SHARE.
3. اختر صورة من صور أو SNS، أو التقاط صورة مع كاميرا الهاتف الذكي.
4. مرة واحدة يتم تحديد صورة، تحرير الصحافة وتحرير الصورة (التحجيم، وتناوب، فلتر والقالب).
5. يتم تحديد رسالة المشاركة في قالب إذا القالب الذي يقبل النص.
6. اضغط "الاتصال والطباعة." عند اكتمال editting.
7. عند طباعة لأول مرة، سيطلب كلمة المرور للطابعة، يرجى إدخال كلمة الأولية التي وكتب في دليل المستخدم الخاص بالطابعة.